Computerhilfen.de Logo
Forum
Tipps
News
Frage stellen

Suse: Suse: openSUSE , ganz neuer Sony VAIO Laptop VGN-N11S/W schläft ein ;(

hallo, ich habe seit ca. 3 Monate auch änlichech Problem. habe schon alles probiert, jedoch zweifele ich schon dass es überhaupt eine Lösung gibt. ich würde mich SEHR FREUEN wenn jemand hier helfen kann.

Das System schläft einfach nach unbestimmte Zeit ein, egal ob ich was mache oder nicht oder bei leerlauf. ich kann leider nicht bestimmen ob es an bestimmte Software oder Programme liegt, denn passiert immer wieder bei verschiedenen Programme. (meistens wenn ich Skype oder SeaMonkey verwende , aber auch nicht nur dann)

Das System ist mit openSUSE (suse 10.2) , ganz neuer Sony VAIO Laptop VGN-N11S/W.

CPU
(null) Genuine Intel(R) CPU           T2050  @ 1.60GHz, 800 MHz

1 GB RAM

Kernel
Linux 2.6.18.8-0.1-default for i686 (build #1 SMP Fri Mar 2 13:51:59 UTC 2007)
ACPI release 20060707

ACPI ist z.Z ON:

ACPI: (supports S0 S3 S4 S5)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [  SONY] OemTableId [      J4] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [  SONY] OemTableId [      J4] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [  SONY] OemTableId [      J4] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [  SONY] OemTableId [      J4] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
# ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold [20060707]
ACPI: Thermal Zone [TZ00] (57 C)
ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold
# [20060707]
ACPI: Thermal Zone [TZ01] (57 C)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 225
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 233
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 50
ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 50
ACPI: PCI Interrupt 0000:08:03.1[A] -> GSI 16 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 19 (level, low) -> IRQ 225
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI Sony Notebook Control Driver v0.2 successfully installed


------------------------------------

Natürlich dachte ich mir erst , dass es an ACPI liegt und habe es aus den Runlevel (2,3,5 ) entfernt. Habe ganz ohne Powersafe , später auch mit APMD und was weis ich noch getestet.
Also Ergebnis gleich NULL ;(

Nun weis ich leider nicht was noch sein könte, ich habe eine Ganze Menge überflüssige Programme entfernt und es passiert immer noch . Manchmal arbeite  ich 12-13 Stunden ohne Probleme, manchmal Stürz die Kiste 5-6 mal pro Stunde.

Es passiert auch , wenn ich die kiste im leerlauf lasse und sich der Display ausschaltet, dann wir die SELTEN wach. Meist passiert nichts  und ich muss reseten .

der Bootvorgang ist perfekt , dauert keine 30 sek., alles wird erkannt und angeblich gibt es KEINE Probleme !

Eine Idee?

Vielen Dank im Voraus.   


Antworten zu Suse: Suse: openSUSE , ganz neuer Sony VAIO Laptop VGN-N11S/W schläft ein ;(:

Habe genau das gleiche Problem (vielleicht nichtmehr?- Weiß noch nicht genau, das stellt sich mit der Zeit raus)

http://www.computerhilfen.de/hilfen-6-163211-0.html

Schau mal in /var/log/messages nach Fehlern.

Hatte auch das ganze System upgedated. Trotzdem trat heute Morgen wieder der Freeze ein. Hab jetzt den Kernel auf 2.6.18.2-34-default downgegraded und hoffe mal, dass das Problem jetzt nicht mehr existent ist. Werde Morgen mal berichten, ob mein Rechner wieder gefreezt ist ;)

MfG

Buja

Apr 17 00:49:05 localhost ifup-dhcp: Starting DHCP Client Daemon on eth1...
Apr 17 00:49:05 localhost ifup-dhcp: .
Apr 17 00:49:05 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr 17 00:49:05 localhost kernel: NET: Registered protocol family 10
Apr 17 00:49:05 localhost kernel: lo: Disabled Privacy Extensions
Apr 17 00:49:05 localhost kernel: IPv6 over IPv4 tunneling driver
Apr 17 00:49:05 localhost syslog-ng[2847]: Changing permissions on special file /dev/xconsole
Apr 17 00:49:05 localhost syslog-ng[2847]: Changing permissions on special file /dev/tty10
Apr 17 00:49:05 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Apr 17 00:49:05 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Apr 17 00:49:05 localhost kernel: Netfilter messages via NETLINK v0.30.
Apr 17 00:49:05 localhost kernel: ip_conntrack version 2.4 (8116 buckets, 64928 max) - 228 bytes per conntrack
Apr 17 00:49:05 localhost kernel: ACPI: AC Adapter [ADP1] (on-line)
Apr 17 00:49:05 localhost kernel: ACPI: Battery Slot [BAT0] (battery present)
Apr 17 00:49:05 localhost kernel: ACPI: Lid Switch [LID0]
Apr 17 00:49:05 localhost kernel: ACPI: Power Button (CM) [PWRB]
Apr 17 00:49:05 localhost kernel: ACPI (exconfig-0455): Dynamic SSDT Load - OemId [  SONY] OemTableId [      J4] [20060707]
Apr 17 00:49:05 localhost kernel: ACPI (exconfig-0455): Dynamic SSDT Load - OemId [  SONY] OemTableId [      J4] [20060707]
Apr 17 00:49:05 localhost kernel: ACPI: CPU0 (power states: C1[C1] C2[C2])
Apr 17 00:49:05 localhost kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Apr 17 00:49:05 localhost kernel: ACPI (exconfig-0455): Dynamic SSDT Load - OemId [  SONY] OemTableId [      J4] [20060707]
Apr 17 00:49:06 localhost kernel: ACPI (exconfig-0455): Dynamic SSDT Load - OemId [  SONY] OemTableId [      J4] [20060707]
Apr 17 00:49:06 localhost kernel: ACPI: CPU1 (power states: C1[C1] C2[C2])
Apr 17 00:49:06 localhost kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Apr 17 00:49:06 localhost kernel: Time: acpi_pm clocksource has been installed.
Apr 17 00:49:06 localhost kernel: ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold

  • [20060707]

Apr 17 00:49:06 localhost kernel: ACPI: Thermal Zone [TZ00] (38 C)
Apr 17 00:49:06 localhost kernel: ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold
  • [20060707]

Apr 17 00:49:06 localhost kernel: ACPI: Thermal Zone [TZ01] (38 C)
Apr 17 00:49:06 localhost kernel: ACPI Sony Notebook Control Driver v0.2 successfully installed
Apr 17 00:49:06 localhost kernel: sky2 eth0: enabling interface
Apr 17 00:49:06 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Apr 17 00:49:06 localhost kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
Apr 17 00:49:06 localhost kernel: NET: Registered protocol family 17
Apr 17 00:49:06 localhost ifup-dhcp: .
Apr 17 00:49:07 localhost ifup-dhcp: .
Apr 17 00:49:08 localhost ifup-dhcp: .
Apr 17 00:49:09 localhost logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/Xservers
Apr 17 00:49:09 localhost logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/xdm-config
Apr 17 00:49:09 localhost ifup-dhcp: .
Apr 17 00:49:10 localhost ifup-dhcp: no IP address yet... backgrounding.
Apr 17 00:49:10 localhost kernel: [drm] Initialized drm 1.0.1 20051102
Apr 17 00:49:10 localhost kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
Apr 17 00:49:10 localhost kernel: [drm] Initialized i915 1.5.0 20060119 on minor 0
Apr 17 00:49:10 localhost ifstatus:     eth0      device: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 13)
Apr 17 00:49:10 localhost ifstatus:     eth0      configuration: eth-id-00:13:a9:80:65:77
Apr 17 00:49:10 localhost ifstatus:     eth0      ifplugd is running
Apr 17 00:49:11 localhost ifplugd-selectif:     eth0      no cable connected
Apr 17 00:49:11 localhost ifstatus-dhcp:     eth0      DHCP client NOT running
Apr 17 00:49:11 localhost ifstatus:     eth0      device: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 13)
Apr 17 00:49:11 localhost ifstatus:     eth0      configuration: eth-id-00:13:a9:80:65:77
Apr 17 00:49:11 localhost ifstatus:     eth0      ifplugd is running
Apr 17 00:49:12 localhost ifplugd-selectif:     eth0      no cable connected
Apr 17 00:49:12 localhost ifstatus-dhcp:     eth0      DHCP client NOT running
Apr 17 00:49:13 localhost ifstatus:     eth1      device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
Apr 17 00:49:13 localhost ifstatus:     eth1      configuration: wlan-bus-pci-0000:06:00.0
Apr 17 00:49:13 localhost ifstatus:     eth1      is prepared for use with ifplugd
Apr 17 00:49:14 localhost ifplugd-selectif:     eth1      is assumed to be associated
Apr 17 00:49:15 localhost ifstatus-dhcp:     eth1      dhcpcd is still waiting for data
Apr 17 00:49:16 localhost ifstatus:     eth1      device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
Apr 17 00:49:16 localhost ifstatus:     eth1      configuration: wlan-bus-pci-0000:06:00.0
Apr 17 00:49:16 localhost ifstatus:     eth1      is prepared for use with ifplugd
Apr 17 00:49:17 localhost ifplugd-selectif:     eth1      is assumed to be associated
Apr 17 00:49:18 localhost ifstatus-dhcp:     eth1      dhcpcd is still waiting for data
Apr 17 00:49:19 localhost ifstatus:     eth1      device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
Apr 17 00:49:19 localhost ifstatus:     eth1      configuration: wlan-bus-pci-0000:06:00.0
Apr 17 00:49:19 localhost ifstatus:     eth1      is prepared for use with ifplugd
Apr 17 00:49:20 localhost ifplugd-selectif:     eth1      is assumed to be associated
Apr 17 00:49:21 localhost ifstatus-dhcp:     eth1      dhcpcd is still waiting for data
Apr 17 00:49:23 localhost ifstatus:     eth1      device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
Apr 17 00:49:23 localhost ifstatus:     eth1      configuration: wlan-bus-pci-0000:06:00.0
Apr 17 00:49:23 localhost ifstatus:     eth1      is prepared for use with ifplugd
Apr 17 00:49:24 localhost ifplugd-selectif:     eth1      is assumed to be associated
Apr 17 00:49:25 localhost ifstatus-dhcp:     eth1      dhcpcd is still waiting for data
Apr 17 00:49:25 localhost ifstatus:     eth1      device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
Apr 17 00:49:25 localhost ifstatus:     eth1      configuration: wlan-bus-pci-0000:06:00.0
Apr 17 00:49:25 localhost ifstatus:     eth1      is prepared for use with ifplugd
Apr 17 00:49:26 localhost ifplugd-selectif:     eth1      is assumed to be associated
Apr 17 00:49:27 localhost ifstatus-dhcp:     eth1      dhcpcd is still waiting for data
Apr 17 00:49:28 localhost kernel: IA-32 Microcode Update Driver: v1.14a <[email protected]>
Apr 17 00:49:28 localhost kernel: audit(1176763768.351:3): audit_backlog_limit=256 old=64 by auid=4294967295
Apr 17 00:49:28 localhost auditd: Config file /etc/audit/auditd.conf doesn't exist, skipping
Apr 17 00:49:28 localhost sshd[4886]: Server listening on :: port 22.
Apr 17 00:49:29 localhost rcpowersaved: s2ram does not know your machine. See 's2ram -i' for details. (127)
Apr 17 00:49:29 localhost rcpowersaved: Use SUSPEND2RAM_FORCE=yes to override this detection.
Apr 17 00:49:29 localhost kernel: audit(1176763769.751:4): audit_pid=4805 old=0 by auid=4294967295
Apr 17 00:49:29 localhost auditd[4805]: Init complete, auditd 1.2.6 listening for events
Apr 17 00:49:30 localhost kernel: sonypi: Sony Programmable I/O Controller Driver v1.26.
Apr 17 00:49:30 localhost kernel: sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
Apr 17 00:49:30 localhost kernel: sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
Apr 17 00:49:30 localhost kernel: input: Sony Vaio Jogdial as /class/input/input8
Apr 17 00:49:30 localhost kernel: input: Sony Vaio Keys as /class/input/input9
Apr 17 00:49:30 localhost smpppd[4907]: smpppd version 1.59 started
Apr 17 00:49:30 localhost kernel: sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 646)
Apr 17 00:49:30 localhost kernel: sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 657)
Apr 17 00:49:30 localhost kernel: sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 659)
Apr 17 00:49:30 localhost kernel: sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 646)
Apr 17 00:49:31 localhost /usr/sbin/cron[5017]: (CRON) STARTUP (V5.0)
Apr 17 00:49:32 localhost SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Apr 17 00:49:32 localhost SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
Apr 17 00:49:32 localhost SuSEfirewall2: Warning: no interface active
Apr 17 00:49:33 localhost SuSEfirewall2: batch committing...
Apr 17 00:49:34 localhost SuSEfirewall2: Firewall rules successfully set
Apr 17 00:49:39 localhost zmd: NetworkManagerModule (WARN): Failed to connect to NetworkManager
Apr 17 00:50:18 localhost zmd: Daemon (WARN): Not starting remote web server
Apr 17 00:50:36 localhost kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready

Hat dir diese Antwort geholfen?

Danke ButtonHilfreiche Antwort Button

Hallo,

Zum einen solltest du die Updates installiert haben, besonders den neuesten Kernel. Dann sagt dir die Suse schon, wo es klemmt

Use SUSPEND2RAM_FORCE=yes to override this detection.

Beutet soviel wie mit einem Editor die Energiesparfunktionen anzupassen. Die findest du im Verzeichnis /etc/pm/config Parameter:
S2RAM_OPTS=""
Die Hinweise dazu: beachte den Link in der Konfigurationsdatei.

Bei einem Sony Vaio solltest du auch das Paket spicctrl per yast nachinstallieren. Die Sonyfunktionen konfigurierst du im Kontrollzentrum-> ( Desktop konfigurieren, Persönliche Einstellungen ) Systemverwaltung ->Sony Vaio Notebook. ( KDE DESKTOP )

Have Fun

Ok, erst mal VIELEN DANK.
das paket spicctrl habe ich gerade nachinstalliert.
mein kernel ist z.Z 2.6.18.8-0.1-default .

die einstellung unter Systemverwaltung ->Sony Vaio Notebook, kenne ich zwar, da ist aber nicht viel zu einstellen.

und hier ist meine /etc/pm/config. Was muss ich denn genau hier eintragen ? S2RAM_OPTS="" ?

cat /etc/pm/config
# what modules should be unloaded during suspend/hibernate?
# note that this removes the module and all dependent modules, if possible.
SUSPEND_MODULES="button"

# this variable is not used in the SUSE package, we use s2ram instead
HIBERNATE_RESUME_POST_VIDEO="no"

#######################################################################
# the variables below here are specific to the SUSE package right now

# what options should be passed to s2ram?
# see http://en.opensuse.org/S2ram for more information
S2RAM_OPTS=""

# where is the s2disk binary located? Defaults to "/usr/sbin/s2disk"
# (do not change unless you kow what you are doing)
# S2DISK_BIN=""

# which method should be used for suspend to disk?
# defaults to "autodetect" ("userspace" if s2disk is available, "kernel" otherwise)
# (do not change unless you kow what you are doing)
HIBERNATE_METHOD=""




vielen Dank im Voraus.
Marti

Hat dir diese Antwort geholfen?

Danke ButtonHilfreiche Antwort Button

Hallo,

wie steht es da im Text der Konfigurationsdatei?

see http://en.opensuse.org/S2ram for more information


Have Fun

« Letzte Änderung: 17.04.07, 15:12:38 von Dr. SuSE »

ok danke.

bei mir hat es mit: s2ram -f funktioniert, also habe ich -f  in /etc/pm/config
wie folgt eingetragen:
S2RAM_OPTS="-f"

ist dies korrekt?

suspend to RAM funktioniert über konsole und KDE damit einwandfrei, jedoch suspend to DISC nicht (rechner wird nicht wach) , was aber egal ist, denn ich habe die Funktion (suspend to Disc) ausgeschaltet.

Soll das wirklich meine lösung dein ;)), mal sehen ob der rechner nun abstürzt...

Vielen dank für die Hilfe (dr. Suse & co)
 

einen dicken DANK an dr. Suse & Co , ich denke das Problem wurde gelöst  der rechner läuft schon 36 Stunden ohne Abstürz ;))

Wahrscheinlich lag es wirklich daran. Ich habe zwar komische Sound-Effekte nach aufwachen (suspend to Ram) was aber wirklich nicht schlimm ist. Vielleicht geht das beim nächsten UPDATE auch weg .

Vielen Dank
Marti

Hat dir diese Antwort geholfen?

Danke ButtonHilfreiche Antwort Button

Hallo,

-f ist schon der richtige Parameter. Gibt aber noch ein paar mehr. Kommt auch auf die Grafikkarte an.

Nvidia:

-f  wie Du es eingestellt hat

Intel Graphics Chipsets

-f -a3", even when using vesafb framebuffer. If " -f -a3" does not work (for example on Dell machines), often " -f -p -m" works well.

Newer intel Xorg drivers seem to have problems with "-s" (VBE_SAVE), so "-m" (VBE_MODE) should be used if at all possible with them.

ATI Graphics Chipsets

Lately many machines i came across with ATI Radeon graphics chipsets did not work with any framebuffer (usually they hung inside the BIOS, not even capslock did work after trying to resume). They often worked fine with "vga=0" and " -f -p -m" or " -f -p -s".

For Problems with s2ram wakeup with the fglrx-driver 8.32.xx please get an update to 8.34.xx

Quelle: http://en.opensuse.org/S2ram

« Letzte Änderung: 18.04.07, 22:54:30 von Dr. SuSE »

Hallo,

leider ist das Problem wieder aufgetreten, zwar nicht so oft jedoch Heute 2 mal während ich per Skype tel. habe. der rechner bleibt einfach stehen und ich kann nur die Maus bewegen. Was kann es denn noch sein? muss ich noch was bei Sony vaio beachten, oder mal abwarten bis das Suse-Kernel-Team einen Sony Vaio bekommen hat ;))) .

habe schon alles probiert und nachinstalliert. S2ram ist  nun auch OK! Der abstürzt kommt jetzt zwar selten , jedoch sehr unangenehm  wenn ich gerade eine mail beantworte. Bitte um Hilfe und Rückmeldung.

PS.. leider verraten die Logs auch nicht viel.- angeblich alles OK! 

Hat dir diese Antwort geholfen?

Danke ButtonHilfreiche Antwort Button

Hallo,

prüfe mal ob du das neueste Skype paket installiert hast. Scheint ja der Kandidat zu sein, der das System runter zieht. Bis die Frage geklärt ist, einfach Skype beenden wenn du andere Sachen machst. Bei Skype bist du leider auf das Skypepaket festgenagelt. Für SIP gibt es etliche Client-Alternativen. Wenn Du nicht wissen solltest was das SIP - Protokoll ist, ist das, was alle Telefongesellschaften weltweit für VOIP benutzen. Skype ist eine Insellösung eines einzelnen Anbieters. Vorteil von SIP, wesentlich mehr Nutzer mit denen Du kostenlos weltweit telefonieren kannst, günstiger in den Tarifen und es gibt auch ein Haufen Hardware dafür,von Fitzbox bis xxx,  so dass Du nicht an den Rechner gebunden bist um per VOIP zu telefonieren. Habe selbst das Siemens Gigaset 450 IP im Gebrauch. Nur mal so zur Info.

Have Fun

ja ist das neueste Skype paket! aber Skype ist mir nicht so wichtig , kann ich solange verzichten.

Fürs tel. verwende ich normalerweise Twinkle (SIP) zum chaten kann ich ja weiterhin Kopete nutzen.

Ok, dann testen ich jetzt so (ohne Skype) und melde mich wenn ich was habe.

Vielen dank dr. Suse!

bye

Hallo dr. Suse,

hier meine neue Diagnose ;).
an skype liegt es wahrscheinlich nicht. habe die tage ohne Skype gesurft und trotzdem min. 2 abstürze am tag erlebt.
jetzt gerade auch (15:50 Uhr) .
kann es daran liegen:
Apr 30 15:47:46 dhcppc1 SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.

ip6tables????


der Log zeigt folgendes:

/var/log/messages
Apr 30 15:48:17 dhcppc1 kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none
Apr 30 15:48:18 dhcppc1 ifplugd(eth0)[12366]: Link beat detected.
Apr 30 15:56:43 dhcppc1 gconfd (server-13038): (Version 2.14.0) wird gestartet, Prozesskennung 13038, Benutzer »server«
Apr 30 15:56:43 dhcppc1 gconfd (server-13038): Die Adresse »xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Apr 30 15:56:43 dhcppc1 gconfd (server-13038): Die Adresse »xml:readwrite:/home/server/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
Apr 30 15:56:43 dhcppc1 gconfd (server-13038): Die Adresse »xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Apr 30 15:56:43 dhcppc1 gconfd (server-13038): Die Adresse »xml:readonly:/etc/opt/gnome/gconf/gconf.xml.schemas« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Apr 30 16:05:46 localhost syslog-ng[2757]: syslog-ng version 1.6.11 starting
Apr 30 16:05:48 localhost ifstatus:     lo       
Apr 30 16:05:48 localhost ifstatus: lo is up
Apr 30 16:05:48 localhost ifstatus: 1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
Apr 30 16:05:48 localhost ifstatus:     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
Apr 30 16:05:48 localhost ifstatus:     inet 127.0.0.1/8 scope host lo
Apr 30 16:05:48 localhost ifstatus:     inet6 ::1/128 scope host
Apr 30 16:05:48 localhost ifstatus:        valid_lft forever preferred_lft forever
Apr 30 16:05:48 localhost ifstatus:               IP address: 127.0.0.1/8
Apr 30 16:05:48 localhost ifstatus-route: Configured routes for interface lo:

--------------------------------------
/var/log/warn:

Apr 30 15:47:33 dhcppc1 syslog-ng[2790]: Changing permissions on special file /dev/xconsole
Apr 30 15:47:33 dhcppc1 syslog-ng[2790]: Changing permissions on special file /dev/tty10
Apr 30 15:47:33 dhcppc1 dhcpcd[11864]: terminating on signal 15
Apr 30 15:47:35 dhcppc1 ifplugd(eth0)[12366]: client: ifup eth0 -o ifplugd
Apr 30 15:47:35 dhcppc1 ifplugd(eth0)[12366]: client:     eth0      device: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 13)
Apr 30 15:47:35 dhcppc1 ifplugd(eth0)[12366]: client:     eth0      configuration: eth-id-00:13:a9:80:65:77
Apr 30 15:47:35 dhcppc1 SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Apr 30 15:47:40 dhcppc1 ifplugd(eth0)[12366]: client: Starting DHCP Client Daemon on eth0... . . . . . no IP address yet... backgrounding.
Apr 30 15:47:40 dhcppc1 ifplugd(eth0)[12366]: Program execution failed, return value is 12.
Apr 30 15:47:46 dhcppc1 SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Apr 30 16:05:51 localhost syslog-ng[2757]: Changing permissions on special file /dev/xconsole
Apr 30 16:05:51 localhost syslog-ng[2757]: Changing permissions on special file /dev/tty10
Apr 30 16:05:51 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Apr 30 16:05:51 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Apr 30 16:05:51 localhost kernel: Netfilter messages via NETLINK v0.30.
Apr 30 16:05:51 localhost kernel: ip_conntrack version 2.4 (8116 buckets, 64928 max) - 228 bytes per conntrack


-------------------------------------------


vielen Dank im Voraus.
marti



 

Hat dir diese Antwort geholfen?

Danke ButtonHilfreiche Antwort Button

Hallo,

da sind keine Fehler drin. Alle Meldungen im grünen Bereich.

Have Fun

 :o
Hi,

woran kann denn liegen?
vielleicht kommt Suse mit Dynamische CPU Leistung nicht klar?! Kann der Dual Core und dynamische CPU frequenz der grund dafür sein?

Ich weis wirklich nicht mehr was ich noch ausschalten kann ;) , fast alle überflüssige Progs. sind aus.

bye


« Suse: Wie richtig partitionieren Suse: Probleme mit Mplayer »
 

Schnelle Hilfe: Hier nach ähnlichen Fragen und passenden Tipps suchen!

Fremdwörter? Erklärungen im Lexikon!
Betriebssystem
Das Betriebssystem ist das Steuerungsprogramm des Computers, das als eines der ersten Programme beim Hochfahren des Rechners geladen wird. Arbeitsspeicher, Festplatten, E...

Binärsystem
Unter dem Begriff Binärsystem (oder Dualsystem) versteht man ein Zahlensystem, das lediglich zwei Zustände oder Werte kennt: Null (0) und Eins (1). Es bildet di...

Bus System
Ein Bus ist ein System zur Datenübertragung. Durch einen Bus können mehrere Teilnehmer über eine Leitung miteinander verbunden werden, ohne dabei an der Da...